Roll over image to zoom in
Ironton OHV Horizontal Engine 208cc, 3/4in. 19.05mm x 2 19/64in. 58.5mm Shaft
Product Summary
This Ironton OHV Horizontal Engine is an easy-to-install solution for small engine needs. With 208cc and 9 ft.-lbs. Gross Torque/12.5N.m/2,800rpm engine torque, this 500-hour engine provides enough power to run a wide range of equipment, including log splitters and pressure washers. Its design incorporates a cast iron cylinder sleeve and dual ball bearing crankshafts. Low-oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure. The recoil start has a compression release that helps you get ruing on the first pull.n
Key Specs
Item# | 45751 |
Brand | Ironton |
Manufacturers Warranty | 3 months parts / 3 months labor |
Ship Weight | 37.4 lbs |
Engine Displacement | 208 cc |
Engine Type | OHV |
Start Type | Recoil |
Shaft Diameter | 3/4 in |
Shaft Length | 2.29 in |
Shaft Diameter Metric | 19.05 mm |
Shaft Length Metric | 58.5 mm |
Shaft Output | Horizontal |
Shaft Keyway | 0.19 in |
Shaft Rotation (From PTO Shaft Side) | Counterclockwise |
PTO Height | 4.17 in |
Cylinders (qty.) | 1 |
Cylinder Bore | Cast iron |
Cooling System | Air cooled |
Air Cleaner Type | Pleated paper w/foam pre-cleaner |
Fuel Tank Capacity | 3.38 qt |
Oil Capacity | 0.5 qt |
Low Oil Alert | Yes |
Lubrication System | Splash |
Ignition System | Electronic |
Governor System | Mechanical |
Carburetor | Float/choke |
Max. RPM | 3,800 |
Muffler Included | Yes |
CARB Approval | No |
Bolt Circle | 3.625 in |
Mounting Base Length | 6.4 in |
Mounting Base Width | 3.07 in |
Dimensions L x W x H (in.) | 16.5 x 15 x 14.8 in |
Additional information
Brand | Ironton |
---|
Reviews
There are no reviews yet.